Building a 630-Meter Transmit Converter

Inside view of completed 630m transmit converter

This is a companion to my earlier 2200-meter transmit converter. Refer to that post for more details. This one produces about 25 dBm output. Not much is different here except for component values in the low pass filter and the trimmer potentiometer. I didn’t have another of the same type and value. It isn’t critical since it is only being used as a voltage divider to set bias on the BS170 FET.

 

 

 

 

Schematic diagram and parts values for the 630m transmit converter

Leave a Reply